The Z-Flash OBD-II Plug and Play Flasher for Chrysler Vehicles plugs directly into the OBD-II port of select vehicles and flashes your Chrysler’s factory lights. Now you can activate your Z-Flash with the ease of a switch or hardwire into a controller or switch panel to activate up to 3 modes. The Z-Flash OBD-II Plug and Play Flasher is a true plug and play system with no permanent modifications. To activate, plug the Z-Flash into your OBD-II port, use the included switch or hardwire into your controller, and go!  

What's in the Box:
(1) Z-Flash OBD-II Port Plug and Play Flasher
(1) Switch
​(1) Hardwire
(1) USB Cable
(1) Gateway Bypass Module OR T-Harness (FOR SELECT VEHICLES ONLY)  

​FEATURES

  • Six Customizable Patterns
  • One Year Warranty
  • Made in the USA
The module flashes these lights:
  • Low beam headlights
  • High beam headlights
  • Fog lights
  • Turn signals
  • Daytime running lights
  • Reverse lights
  • Tail lights
  • License plate lights
  • Center mount high stop light
  • Bed lights for RAM

COMPATIBILITY​

     Ram 1500      2007-2012*, 2013 - 2021
     Ram 2500      2007-2012*, 2013 - 2021
     Ram 3500      2007-2012*, 2013 - 2021
     Ram 4500      2013 - 2021
     Ram 5500      2013 - 2021
     Dodge Durango      2010-2013*, 2014 - 2021
     Dodge Charger      2006-2010*, 2011 - 2021
     Dodge Challenger      2008-2014*, 2015 - 2020
     Dodge Grand Caravan      2008 - 2021
     Dodge Magnum      2006-2008*
     Chrysler 300      2005-2010*, 2011 - 2021
     Chrysler Pacifica      2017-2021
     Jeep Grand Cherokee      2006-2013*, 2014 - 2021
     Jeep Liberty      2008-2012*
     Jeep Wrangler JK      2007-2018*
     Jeep Wrangler JL      2018 - 2021
     Jeep Gladiator      2020-2021
*Does not have high beam stalk activation or the dashboard display to let you know the pattern name
​All 2018-2020 model year vehicles will require an additional gateway module.
​See manual for location and module installation.
  • ​T-Harness acts as a security bypass module for 2018 Ram 1500, 2019-2020 Ram 1500 Classic, and 2018-2020 Ram 2500-5500 only. This harness allows you to use your Z-Flash without having to remove the radio to access the security gateway and install a Gateway Bypass Module. ​

Install Instructions

  1. Plug the switch or hardwire into the 2x2 port on the side of your Z-Flash module.
  2. Plug the Z-Flash module into your vehicle's OBD-II port. The red indicator light flashes for about 5 seconds while the Z-Flash boots. The light blinks green when the Z-Flash is ready.*
  3. Activate via the switch or hardwire into your existing controller.
* Select models require an additional Gateway Module or T-Harness adapter.